cld-ct1230.007 product family data sheet cree ? plcc4 3 in 1 rgb smd led clmvb-fka www.cree.com/hb copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. product description the clmvb-fka full-color rgb led offers a high-intensity light output and a wide viewing angle. the compact 2mm x 2mm package allows for a very high resolution screen and is designed to work in a wide array of environmental conditions. cree plcc full-color rgb leds are suited for indoor video screen, decorative lighting and amusement applications. features ? size (mm):2.0x 2.0 ? dominant wavelength: red (619 - 624nm) green (520 - 540nm) blue (460 - 480nm) ? luminous intensity (mcd) red (224 - 450) @ 20ma green (180 - 450) @10ma blue (56 - 140) @ 10ma ? lead-free ? rohs compliant cree, inc. 4600 silicon drive durham, nc 27703 usa tel: +1.919.313.5300 www.cree.com/xlamp copyright ? 2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree and the cree logo are registered trademarks of cree, inc. cree, inc. 4600 silicon drive durham, nc 27703 usa tel: +1.919.313.5300 applications ? full-color video screen ? decorative lighting ? amusement
copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. 2 copyright ? 2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree and the cree logo are registered trademarks of cree, inc. 2 cree plcc4 3 in 1 smd rgb led clmvb-fka absolute maximum ratings (t a = 25c) items symbol absolute maximum rating unit r g b forward current note 1 i f 25 17 17 ma peak forward current note 2 i fp 100 70 70 ma reverse voltage v r 5 5 5 v power dissipation p d 65 65 65 mw operation temperature t opr -40 ~ +100 c storage temperature t stg -40 ~ +100 c junction temperature t j 110 110 110 c junction/ambient 1 chip on r thja 450 400 450 c/w junction/solder point 1 chip on r thjs 300 280 300 c/w note: 1.single-color light. 2.pulse width 0.1 msec, duty 1/10. typical electrical & optical characteristics (t a = 25c) characteristics condition symbol values unit r g b dominant wavelength i f = 20 ma(r) i f = 10 ma(b.g) dom 619~624 520~540 460~480 nm spectral bandwidth at 50% i rel max i f = 20 ma(r) i f = 10 ma(b.g) 24 38 28 nm forward voltage i f = 20 ma(r) i f = 10 ma(b.g) v f(avg) 2.0 3.0 3.0 v v f(max) 2.6 3.8 3.8 v luminous intensity i f = 20 ma(r) i f = 10 ma(b.g) i v(min) 224 180 56 mcd i v(avg) 280 260 81 mcd reverse current (max) v r = 5 v i r 10 10 10 a
copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. 3 copyright ? 2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree and the cree logo are registered trademarks of cree, inc. 3 cree plcc4 3 in 1 smd rgb led clmvb-fka intensity bin limit (red i f = 20 ma ,green & blue i f = 10 ma ) color bin limit (red i f = 20 ma ,green & blue i f = 10 ma ) tolerance of measurement of luminous intensity is 10%. tolerance of measurement of dominant wavelength is 1 nm. red bin code min.(mcd) max.(mcd) f 224 280 de 252 318 g 280 355 fg 318 403 h 355 450 green bin code min.(mcd) max.(mcd) e 180 224 bc 202 252 f 224 280 de 252 318 g 280 355 fg 318 403 h 355 450 blue bin code min.(mcd) max.(mcd) l 56 71 3c3b 64 81 a 71 90 3a4 81 101 b 90 112 56 101 126 c 112 140 red bin code min.(nm) max.(nm) rb 619 624 green bin code min.(nm) max.(nm) g7 520 525 g23 522.5 527.5 g8 525 530 g45 527.5 532.5 g9 530 535 g67 532.5 537.5 ga 535 540 blue bin code min.(nm) max.(nm) b3 460 465 b23 462.5 467.5 b4 465 470 b45 467.5 472.5 b5 470 475 b67 472.5 477.5 b6 475 480
copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. 4 copyright ? 2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree and the cree logo are registered trademarks of cree, inc. 4 cree plcc4 3 in 1 smd rgb led clmvb-fka order code table* kit number color luminous intensity (mcd) dominant wavelength (nm) package min. max. color bin min. (nm) color bin max. (nm) clmvb-fka-cfhehlcbb7a363 red 224 450 rb 619 rb 624 reel green 180 450 g7 520 ga 540 reel blue 56 140 b3 460 b6 480 reel CLMVB-FKA-CF1E1L1BB7D3D3 red any 1 intensity bin from f(224) - g(355) rb 619 rb 624 reel green any 1 intensity bin from e(180) - g(355) any 1 hue bin from g7(520) - ga(540) reel blue any 1 intensity bin from l(56) - b(112) any 1 hue bin from b3(460) - b6(480) reel clmvb-fka-cg1f1a1bb8c3c3 red any 1 intensity bin from g(355) - h(450) rb 619 rb 624 reel green any 1 intensity bin from f(224) - h(450) any 1 hue bin from g8(525) - ga(540) reel blue any 1 intensity bin from a(71) - c(140) any 1 hue bin from b3(460) - b5(475) reel notes: 1. the above kit numbers represent the order codes which include multiple intensity-bin and color-bin codes. only one intensity-bin code and one color-bin code will be shipped on each reel. single intensity-bin code and single color- bin code will be orderable in certain quantities. 2. for example, any 1 intensity-bin from f - h means only 1 intensity-bin (f or de or g or fg or h) will be shipped by cree. 3. for example, any 1 color-bin from g7 - ga means only 1 color-bin (g7 or or g23 or g8 or g45 or g9 or g67 or ga) will be shipped by cree. 4. please refer to the cree led lamp reliability test standards document for reliability test conditions. 5. please refer to the cree led lamp soldering & handling document for information about how to use this led product safely.
copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. 5 copyright ? 2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree and the cree logo are registered trademarks of cree, inc. 5 cree plcc4 3 in 1 smd rgb led clmvb-fka graphs the above data are collected from statistical fgures that do not necessarily correspond to the actual parameters of each single led. hence, these data will be changed without further notice.
copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. 6 copyright ? 2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree and the cree logo are registered trademarks of cree, inc. 6 cree plcc4 3 in 1 smd rgb led clmvb-fka graphs the above data are collected from statistical fgures that do not necessarily correspond to the actual parameters of each single led. hence, these data will be changed without further notice.
copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. 7 copyright ? 2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree and the cree logo are registered trademarks of cree, inc. 7 cree plcc4 3 in 1 smd rgb led clmvb-fka mechanical dimensions all dimensions are in mm. notes rohs compliance the levels of environmentally sensitive, persistent biologically toxic (pbt), persistent organic pollutants (pop), or other - wise restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with eu directive 2002/95/ ec on the restriction of the use of certain hazardous substances in electrical and electronic equipment (rohs), as amended through april 21, 2006. vision advisory claim users should be cautioned not to stare at the light of this led product. the bright light can damage the eye.
copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. 8 copyright ? 2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree and the cree logo are registered trademarks of cree, inc. 8 cree plcc4 3 in 1 smd rgb led clmvb-fka kit number system cree led lamps are tested and sorted into performance bins. a bin is specifed by ranges of color, forward voltage, and brightness. sorted leds are packaged for shipping in various convenient options. please refer to the cree led lamp packaging standard document for more information about shipping and packaging options. cree leds are sold by order codes in combinations of bins called kits. order codes are confgured in the following man - ner:
copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. 9 copyright ? 2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree and the cree logo are registered trademarks of cree, inc. 9 cree plcc4 3 in 1 smd rgb led clmvb-fka ? the clmvb-fka is rated as a msl 5a product. ? after opening the sealed bag,the smd led must be stored under the condition<30 oc and<60%rh . under these conditions,the smd leds must be used (subject to refow) within 24 hours after bag opening, and baking 24-hour/80 oc is required when exceeding 24 hours. ? note that baking must only be done once. ? the temperature profle is as below. use only with clmvb-fka solder average ramp-up rate = 4oc/s max preheat temperature = 150oc ~200oc preheat time = 120s max ramp-down rate = 6oc/s max peak temperature = 235oc max time within 5oc of actual peak temperature = 10s max duration above 217oc is 45s max do cu m ent no .: c ot co - 05 - 0057 rev . n o. : 13 6 / 9 m e l t i ng - po i nt p r e - heat s oak r e f l ow c oo li ng t ime t e m p e r a t u r e u se a ll s m d b es i d es l p 6 - n pp 1 - 01 - n1 s o l d e r = s n 63 - p b 37 s o l d e r = l ea d -f r ee a ve r ag e r a m p - up r a t e = 4 o c / s m a x. a ve r ag e r a m p - up r a t e = 4 o c / s m a x p r e h e a t t e m p e r a t u r e = 100 o c ~150 o c p r e h e a t t e m p e r a t u r e = 150 o c ~200 o c p r e h e a t t i m e = 100 s m a x. p r e h e a t t i m e = 100 s m a x. r a m p - do w n r a t e = 6 o c / s m a x. r a m p - do w n r a t e = 6 o c / s m a x. p e a k t e m p e r a t u r e = 230 o c m a x. p e a k t e m p e r a t u r e = 250 o c m a x. t i m e w i t h i n 5 o c o f a ct ua l p e a k t e m p e r a t u r e = 10 s m a x. t i m e w i t h i n 5 o c o f a ct ua l p e a k t e m p e r a t u r e = 10 s m a x. d u r a t i on abo ve 183 o c i s 80 s m a x. d u r a t i on abo ve 217 o c i s 80 s m a x. o n l y u se l p 6 - n pp 1 - 01 - n1 [ 13] s o l d e r = lo w l ea d -f r ee a ve r ag e r a m p - up r a t e = 3 o c / s m a x. p r e h e a t t e m p e r a t u r e = 130 o c ~170 o c p r e h e a t t i m e = 120 s m a x. r a m p - do w n r a t e = 6 o c / s m a x. p e a k t e m p e r a t u r e = 213 o c m a x. t i m e w i t h i n 3 o c o f a ct ua l p e a k t e m p e r a t u r e = 25 s m a x. d u r a t i on abo ve 200 o c i s 40 s m a x . r e co mm e nd e d so l d e r pad d e si gn f o r h e a t d i ssi pa t i on ( 2 - p i n s m d l e d ) : 0 . 5 7 . 5 7 .0 4 . 5 2 .6 1 . 5 ? r e co mm e nd e d so l d e r pad d e si gn f o r h e a t d i ssi pa t i on ( 4 - p i n s m d l e d ) soldering pad: ??? ??? ??? ??? ? ?????????????????? ? reflow soldering
copyright ? 2010 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree, the cree logo and xlamp are registered trademarks of cree, inc. 10 copyright ? 2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree and the cree logo are registered trademarks of cree, inc. 10 cree plcc4 3 in 1 smd rgb led clmvb-fka ? the boxes are not water resistant and they must be kept away from water and moisture. ? the leds are packed in cardboard boxes after packaging in normal or anti-electrostatic bags. ? cardboard boxes will be used to protect the leds from mechanical shocks during transportation. ? the reel pack is applied in smd led. ? max 12800 pcs per reel. packaging ? ??? ??? ???? ?????? ????? ????????? ????? ?? ?????? ??
|
